Release Notes for STM32CubeMP1 Firmware Package
Copyright 2019 STMicroelectronics
Introduction
STM32Cube is an
STMicroelectronics original initiative to ease developers life by
reducing development efforts, time and cost. STM32Cube
covers the STM32 portfolio.
STM32Cube Version 1.x includes:
- The STM32CubeMX, a graphical software configuration tool that allows to generate C initialization code using graphical wizards.
- A comprehensive embedded software platform, delivered per series (such as STM32CubeMP1 for STM32MP1 series)
- The STM32Cube HAL, STM32 abstraction layer embedded software ensuring maximized portability across the STM32 portfolio. HAL APIs are available for all peripherals.
- Low-layer APIs (LL) offering a fast light-weight expert-oriented layer which is closer to the hardware than the HAL. LL APIs are available only for a set of peripherals.
- A consistent set of middleware components such as FreeRTOS, OpenAMP.
- All embedded software utilities, delivered with a full set of examples.
The drivers provided within this package support the following devices :
- STM32MP157Cxx, STM32MP157Axx, STM32MP157Dxx, STM32MP157Fxx,
- STM32MP153Cxx, STM32MP153Axx, STM32MP153Dxx, STM32MP153Fxx,
- STM32MP151Cxx, STM32MP151Axx, STM32MP151Dxx, STM32MP151Fxx
For quick getting started with the STM32CubeMP1 firmware package :
- Wiki: Wiki STM32 MP1 Main Page.
- Wiki: Wiki STM32CubeMP1.
- Reference materials available on www.st.com/stm32cubefw
V1.2.0 / 03-Feb-2020
Main changes
Maintenance release of STM32CubeMP1 (STM32Cube for STM32MP1 Series) supporting STM32MP15xx devices- \HAL and LL:
- General updates to fix known defects and enhancements implementation
- Major update of drivers for STM32MP15xx devices:
- ADC:
- Update HAL_ADC_Start_DMA() API to enable DMA mode
- LL : new function to add or remove paths.
- LL_ADC_SetCommonPathInternalChAdd and LL_ADC_SetCommonPathInternalChAdd : New API
- CORTEX:
- Implement LL Driver
- FMC:
- Implement PSRAM Driver: New API
- GENERIC:
- Add EXTERNAL_CLOCK_VALUE in conf_template file.
- TIM:
- HAL&LL: Remove reference to COMP1 and COMP2
- LL:
- Fix TIM Break source definition
- RepetitionCounter value depends on GP or Advanced tmers
- UART:
- HAL: Alignment with STM32F0/F3/H7 (for inter STM32 families portability)
- some API's change to take in consideration
- UTILS:
- LL: Add new Part Number defines related to LL_GetDevicePartNumber()
- \CMSIS:
- Header files:
- Add new Part Number for 800MHz
- Update license with BSD 3-Clause template
- Rework CMSIS for RTC/TAMP, GPIO and TIM
- Rename TIM Break source bit definition
- Update Linker Template file for KEIL and IAR:
- Add OpenAMP region ( region present by default, to comment if needed )
- Cortex-M CMSIS Core:
- No Update
- \BSP:
- No Update
- \Projects:
- General updates to fix known defects and enhancements implementation
- Implement new projects :
- "OpenAMP_FreeRTOS_echo" example for EVAL and DISCO boards
- Stack size increased for "OpenAMP_FreeRTOS_echo"
- Portage on KEIL and IAR
- All DK2 examples ported (except : OpenAMP_TTY_echo_wakeup, OpenAMP_FreeRTOS_echo)
- Replace Linker script by Template file ( adding OpenAMP region by default)
- Remove empty file for "OpenAMP_raw"
- Portage on STM32CubeIDE
- All DK2 examples ported (except : OpenAMP_TTY_echo_wakeup, OpenAMP_FreeRTOS_echo)
- \Middlewares:
- Update to use FreeRTOS V10.0.1 ST modified 20190719
- Update to use OpenAMP v2018.10 ST modified 20200110
- \Utilities:
- Resource Manager: new version mp1/v1.11.0
- Replace Part Number condition by IP name
- Add hardware lock facilities under RESMGR_USE_HARDWARE_LOCK_FEATURE flag
Contents
- Projects
- The STM32CubeMP1 Firmware package comes with a rich set of examples running on STMicroelectronics boards, organized by board and provided with preconfigured projects for the main supported toolchains. The exhaustive list of projects is provided in this table (STM32CubeProjectsList.html).
- Projects release notes (Updates in bold):
- STM32MP157C-EV1
- Applications
- Demonstrations
- HAL Examples
- Templates
- STM32MP157C-DK2
- Applications
- Demonstrations
- HAL Examples
- Templates
| Component | Version | Release note |
|---|---|---|
| Cortex-M CMSIS V5.2.0 | V5.4.0 | release notes |
| STM32MP1xx CMSIS | V1.2.0 | release notes |
| STM32MP1xx HAL | V1.2.0 | release notes |
| BSP STM32MP15xx_EVAL | V1.2.0 | release notes |
| BSP STM32MP15xx_DISCO | V1.2.0 | release notes |
| Component | Version | Release note |
|---|---|---|
| FreeRTOS |
V10.2.1 ST modified 20190719 |
release notes release notes |
| OpenAMP | v2018.10 ST modified 20200110 ST interface 20200110 |
release notes release notes release notes |
| Component | Version | Release note |
|---|---|---|
| Resourcemanager | mp1/V1.11.0 | release notes |
Development Toolchains and Compilers
- The current default IDE:
- All-in-one multi-OS development tool STM32CubeIDE: v1.3.0 - link
- Other IDE's supporting STM32MP1 devices (portage for all projects not completed):
Supported Devices and HW boards
- STM32MP157C-EV1 RevC
- STM32MP157C-DK2 RevC
Known limitations
- NA
Update History
V1.1.0 / 10-Sept-2019
Main changes
Maintenance release of STM32CubeMP1 (STM32Cube for STM32MP1 Series) supporting STM32MP15xx devices
- \HAL and LL:
- General updates to fix known defects and enhancements implementation
- Implementation of LL APIs:
- DMA / EXTI / HSEM / LPTIM / PWR / SPI / TIM / WWDG / I2C
- Major update of drivers for STM32MP15xx devices:
- Rename RCC_IPNAME_BCLK with RCC_IPNAME_BUSNAME
- Impact HAL_RCC / HAL_LPTIM / HAL_UART / HAL_USART
- ADC:
- HAL: Remove ADC_TWOSAMPLINGDELAY_9CYCLES definition
- HAL: Remove ADC_OVERSAMPLING_RATIO_xxx defnitions
- LL : Add ADC Internal Channel VDDCORE management ( LL_ADC_PATH_INTERNAL_VDDCORE)
- HAL & LL: Update for linear calibration and Use 'ADC_LINEAR_CALIB_REG_COUNT'
- DMA:
- HAL: Use DMA_Stream_TypeDef structure for instance (structure change)
- Generic:
- HAL: Update the SystemCoreClock global variable ( needed in case of Coprocesseur use case)
- HAL: Add enable/disable functions for IO Compensation mechanism (new API)
- HAL: Align HAL_CONF template with HAL package
- GPIO:
- Improve HAL_GPIO_TogglePin reentrancy robustness
- Improve robustness of HAL_GPIO_DeInit() on EXTI management
- Update IS_GPIO_PIN assert macro
- IPCC:
- LL: Add service to get the number of supported channels (new API)
- LPTIM:
- HAL: Alignment with STM32H7/WB (for inter STM32 families portability):
- some API's change to take in consideration
- RCC:
- HAL: Rename __HAL_RCC_TMPSENS_CLK_xxx to __HAL_RCC_DTS_CLK_xxx
- HAL: Update to not overwrite Tick priority
- SPI:
- HAL: Add new feature Reload Feature + Duplex Packet DXP (new API)
- TIM:
- HAL: Alignment with STM32F0/F3/H7/WB (for inter STM32 families portability):
- some API's change to take in consideration
- \CMSIS:
- General updates to fix known defects and enhancements implementation
- Update some bit definitions in header files
- Provide A7 header files as examples
- Update startup file for KEIL and IAR
- Cortex-M CMSIS Core:
- Update to new version V5.4.0
- \BSP:
- General updates to fix known defects and enhancements implementation
- \Projects:
- General updates to fix known defects and enhancements implementation
- Implement new projects :
- "OpenAMP_Dynamic_ResMgr" example for EVAL board
- "PWR_STOP_CoPro" example for EVAL and DISCO boards
- "UART_Receive_Transmit_Console" example for EVAL and DISCO boards
- "CoproSync_ShutDown" for DISCO Board
- Add KEIL and IAR Support for STM32MP1-M4 Ecosystem ( few projects only)
- "Templates" / "FreeRTOS_ThreadCreation" and "OpenAMP_raw" examples (for EVAL board Only)
- Add CubeIDE support for STM32MP1-M4 Ecosystem ( few projects only)
- "GPIO_EXTI" ( for EVAL and DISCO boards)
- "Templates" / "FreeRTOS_ThreadCreation" and "OpenAMP_raw" (for EVAL board Only)
- Update projects :
- Align IRQs priorities with RCC_WAKEUP (Higher prio)
- OpenAMP examples : update template files related to OpenAMP middleware delivery
- Update fw_cortex_m4 script to stop systematically fw if already running
- \Middlewares:
- Update to use FreeRTOS V10.0.1 ST modified 20190329
- Update to use OpenAMP v2018.10
- \Utilities:
- Resource Manager:
- Update RESMGR_ID according to device ID
- Rename TMPSENS with DTS
- Rename RESMGR_FLAGS_CPU* and update ResMgr_Release() - Update API
Contents
- Projects
- The STM32CubeMP1 Firmware package comes with a rich set of examples running on STMicroelectronics boards, organized by board and provided with preconfigured projects for the main supported toolchains. The exhaustive list of projects is provided in this table (STM32CubeProjectsList.html).
- Projects release notes (Updates in bold):
- STM32MP157C-EV1
- Applications
- Demonstrations
- HAL Examples
- Templates
- STM32MP157C-DK2
- Applications
- Demonstrations
- HAL Examples
- Templates
| Component | Version | Release note |
|---|---|---|
| Cortex-M CMSIS V5.4.0 | V5.4.0 | release notes |
| STM32MP1xx CMSIS | V1.1.0 | release notes |
| STM32MP1xx HAL | V1.1.0 | release notes |
| BSP STM32MP15xx_EVAL | V1.1.0 | release notes |
| BSP STM32MP15xx_DISCO | V1.1.0 | release notes |
| Component | Version | Release note |
|---|---|---|
| FreeRTOS |
V10.0.1 ST modified 20190329 |
release notes release notes |
| OpenAMP | v2018.10 ST modified 20190329 ST interface 20190729 |
release notes release notes release notes |
| Component | Version | Release note |
|---|---|---|
| Resourcemanager | mp1/V1.9.0 | release notes |
Development Toolchains and Compilers
- The current default IDE:
- System Workbench for STM32 (SW4STM32) toolchain: v2.9
- Other IDE's supporting STM32MP1 devices (portage for all projects not completed):
Supported Devices and HW boards
- STM32MP157C-EV1 RevC
- STM32MP157C-DK2 RevC
Known limitations
- NA
V1.0.0 / 25-January-2019
Main changes
First release of STM32CubeMP1 (STM32Cube for STM32MP1 Series) supporting STM32MP15xx devices
Contents
- Projects
- The STM32CubeMP1 Firmware package comes with a rich set of examples running on STMicroelectronics boards, organized by board and provided with preconfigured projects for the main supported toolchains. The exhaustive list of projects is provided in this table (STM32CubeProjectsList.html).
- Projects release notes (Updates in bold):
- STM32MP157C-EV1
- Applications
- Demonstrations
- HAL Examples
- Templates
- STM32MP157C-DK2
- Applications
- Demonstrations
- HAL Examples
- Templates
| Component | Version | Release note |
|---|---|---|
| Cortex-M CMSIS V5.2.0 | V5.2.0 | release notes |
| STM32MP1xx CMSIS | V1.0.0 | release notes |
| STM32MP1xx HAL | V1.0.0 | release notes |
| BSP STM32MP15xx_EVAL | V1.0.0 | release notes |
| BSP STM32MP15xx_DISCO | V1.0.0 | release notes |
| Component | Version | Release note |
|---|---|---|
| FreeRTOS |
V10.0.1 ST modified 20180813 |
release notes release notes |
| OpenAMP | v2018.10 ST modified 20190125 |
release notes release notes |
| Component | Version | Release note |
|---|---|---|
| Resourcemanager | V1.5.0 | release notes |
Development Toolchains and Compilers
- System Workbench for STM32 (SW4STM32) toolchain v2.8.0
Supported Devices and HW boards
- STM32MP157C-EV1 RevC
- STM32MP157C-DK2 RevC
Known limitations
- NA
For complete documentation on STM32 Microcontrollers, visit: www.st.com/STM32